Sheets
The use of sheets has a very wide range of applications (electrical engineering, engineering, construction and others).
We offer sheets in standard formats of 1000 x 2000 mm (copper, brass). Thicknesses range from 0.5 – 20 mm.
We offer different sheet hardnesses (soft, ½ hard, hard).
For copper sheets, we mainly stock Cu-ETP (CW004A) and Cu-DHP (CW024A) alloys. For brass sheets, it is exclusively CuZn37 alloy (CW508L). We supply materials outside the stock range from production or from our external suppliers.
Copper sheets
| alloy | hardness | temper | Rm (Mpa) | surface | thickness (mm) | standard | |
|
Cu-DHP |
CW024A |
R240 | 1/2 hard | min. 240 | mill-finish | 0,5 – 1,0 |
EN 1172 |
| R240 | 1/2 hard | min. 240 | TE-CU | 0,5 – 1,0 | |||
| R220 | soft | min. 220 | mill-finish | 0,8 – 1,5 | |||
| Cu-ETP | CW004A | R240 | 1/2 hard | min. 240 | mill-finish | 1,5 – 8,0 | EN 13599 |
| Cu-OF | CW008A | R240 | 1/2 hard | min. 240 | mill-finish | 0,5 – 8,0 | EN 13599 |
dimensions:
standard format 1000 x 2000 mm in stock, medium format 1250 x 2500 mm and large format 1500 x 3000 mm on request, strips / slitcoils in the required width are only made to order.
Copper plates
| alloy | hardness | temper | Rm (Mpa) | surface | thickness (mm) | standard | |
| Cu-ETP | CW004A | M | as rolled | mill-finish | 10,0 – 30,0 | EN 13599 | |
| Cu-PHC | CW020A | M | as rolled | mill-finish | 10,0 – 45,0 | EN 1652 | |
| Cu-HCP | CW021A | M | as rolled | mill-finish | 10,0 – 45,0 | EN 1652 | |
dimensions:
standard format 1000 x 2000 mm on stock, medium format 1250 x 2500 mm from production.
Brass sheets
| alloy | hardness | temper | Rm (Mpa) | surface | thickness (mm) | standard | |
|
CuZn37 |
CW508L |
R240 |
1/2 hard |
min. 240 |
bright | 0,5 – 1,5 | EN 1652 |
| mill-finish | 1,6 – 5,0 | EN 1652 | |||||
| G030 | soft | min. 220 | mill-finish | 0,5 – 4,0 | EN 1652 | ||
| CuZn20 | CW503L | R270 | soft | min. 270 | mill-finish | 0,6 – 3,0 | EN 1652 |
| CuNi12Zn24 | CW403J | R360 | soft | min. 360 | mill-finish | 1,0 – 3,0 | EN 1652 |
dimensions:
standard format 1000 x 2000 mm in stock, medium format 1250 x 2500 mm and large format 1500 x 3000 mm on request, strips / slitcoils in the required width are only made to order.
Brass plates
| alloy | temper | Rm (Mpa) | surface | thickness (mm) | standard | ||
| CuZn37 | CW508L | R350 | 1/2 hard | 350 – 440 | as rolled | 10 – 50 | EN 1652 |
| CuZn39Pb2 | CW612N | R360 | 1/2 hard | 360 – 440 | as rolled | 10 – 50 | EN 1652 |
dimensions:
standard format 1000 x 2000 mm, cutted pieces on request
Bronze sheets and plates
| alloy | temper | Rm (Mpa) | A50 min. (%) | surface | thickness (mm) | standard | |
| CuSn6 | CW452K | R350 | 350 – 420 | 45,00 | bright | 1,0 – 15 | EN 1652 |
| CuSn7Zn4Pb7 | CC493K | GC | min. 260 | 12,00 | as rolled | 22 – 150 | EN 1982 |
| CuAl10Fe5Ni5 | CC333G | GC | min. 650 | as rolled | 3 – 150 | EN 1982 | |
dimensions:
standard format 300 x 2000 mm, cutted pieces from thickness 8 mm
Aluminium sheets
| alloy | temper | Rm (Mpa) | A50 min. (%) | surface | thickness (mm) | standard | |
|
Al 99,5 |
EN AW-1050 |
H0 | soft | 65 – 95 |
mill-finish |
0,5 – 6,0 |
EN 485-2 |
| H14 | 1/2 hard | 105 – 145 | 0,5 – 8,0 | ||||
| H18 | hard | min. 120 | bright | 0,3 – 0,5 | |||
|
Al Mg3 |
EN AW-5754 |
H111 | soft | 190 – 240 | mill-finish | 0,8 – 1,5 |
EN 485-2 |
| H22 | 1/4 hard | 220 – 270 | mill-finish | 0,5 – 6,0 | |||
| H24 | 1/2 hard | 240 – 280 | mill-finish | 0,5 – 6,0 | |||
|
Al MgSi1Mn |
EN AW-6082 |
T6 |
hardened |
min. 260 |
0,5 – 1,5 |
EN 485-2 |
|
| T651 | 1,5 – 3,0 | ||||||
dimensions:
standard format 1000 x 2000 mm in stock, medium format 1250 x 2500 mm and large format 1500 x 3000 mm on request, strips / slitcoils in the required width are only made to order.