Aluminium
Aluminum is a metal with very good electrical and thermal conductivity. Due to its light weight, it is widely used in industry. Other properties are: excellent formability, good weldability, high resistance to corrosion. The specific gravity is 2.7 g/cm3.
Application: engineering, transport, construction (thermal insulation, roofing materials), chemical industry, food industry (aluminum foil). Production of nails, rivets, metallization. An alloy of aluminium, copper and magnesium (dural) is widely used in the manufacture of aircraft due to its high strength. Our assortment includes wires, bars for machining, polished anodized sheets (Almeco).
We deliver materials outside the stock range from the factory.
Aluminium wire
| alloy | hardness | temper | Rm (Mpa) | ellongation (%) | standard | ||
|
Al 99,5 |
EN AW-1050 |
0 | soft | max. 95 | 35 |
EN 1301-2 |
|
| H14 | 1/2 hard | min. 100 | 5 | ||||
| H18 | hard | min. 140 | 3 | ||||
|
Al Mg2,5 |
EN AW-5052 |
0 | soft | max. 225 | 15 |
EN 1301-2 |
|
| H14 | 1/2 hard | 225 – 275 | 4 | ||||
| H18 | hard | min 275 | 3 | ||||
|
Al Mg3 |
EN AW-5754 |
0 | soft | max 250 | 16 |
EN 1301-2 |
|
| H14 | 1/2 hard | 255 – 305 | 3 | ||||
| H18 | hard | min. 305 | 2 | ||||
|
Al Mg5 |
EN AW-5019 |
0 | soft | max. 320 | 17 |
EN 1301-2 |
|
| H14 | 1/2 hard | 325 – 385 | 6 | ||||
| H18 | hard | min. 370 | 2 | ||||
|
Al MgSi |
EN AW-6060 |
T4 | 210 | min. 140 | 13 |
EN 1301-2 |
|
| T39 | min. 220 | ||||||
| T89 | min. 260 | ||||||
|
Al MgSi |
EN AW-6101 |
0 | soft | 85 – 105 | EN 573-3 | ||
| H14 | 1/2 hard | 140 – 160 | EN 573-3 | ||||
Packing: coils 20 – 40 kg, drums 80 – 100 kg, plastic spools 7 – 15 kg
Dimensions: dia 0,50 – 8,00 mm
Aluminium sheets
| alloy | temper | Rm (Mpa) | A50 min. (%) | surface | thickness (mm) | standard | |
|
Al 99,5
|
EN AW-1050
|
H0 | soft | 65 – 95 |
mill-finish
|
0,5 – 6,0 |
EN 485-2
|
| H14 | 1/2 hard | 105 – 145 | 0,5 – 8,0 | ||||
| H18 | hard | min. 120 | bright | 0,3 – 0,5 | |||
|
Al Mg3
|
EN AW-5754
|
H111 | soft | 190 – 240 | mill-finish | 0,8 – 1,5 |
EN 485-2
|
| H22 | 1/4 hard | 220 – 270 | mill-finish | 0,5 – 6,0 | |||
| H24 | 1/2 hard | 240 – 280 | mill-finish | 0,5 – 6,0 | |||
|
Al MgSi1Mn
|
EN AW-6082
|
T6 |
hardened
|
min. 260
|
0,5 – 1,5 |
EN 485-2
|
|
| T651 | 1,5 – 3,0 | ||||||
Dimensions: standard format 1000 x 2000 mm in stock, medium format 1250 x 2500 mm and large format 1500 x 3000 mm on request, strips / slitcoils in the required width are only made to order.
Aluminium round bars (for machining)
| alloy | bar | temper | production | Rm (Mpa) | size (mm) | standard | |
| Al Cu4PbMg | EN AW-2030 | round | T3 | drawn | min. 340 | 6 – 60 | EN 754-2 |
| Al Cu4PbMgMn | EN AW-2007 | round | T4 | extruded | min. 330 | 16 – 230 | EN 755-2 |
|
Al Mg4,5Mn0,7
|
EN AW-5083
|
round
|
H111 | casted | min. 270 | 12 – 90 | EN 754-2 |
| H112 | extruded | min. 270 | 15 – 280 | EN 755-2 | |||
|
Al Si1MgMn
|
EN AW-6082
|
round
|
T4 | drawn | min. 205 | 8 – 25 | EN 754-2 |
| T6 | extruded | min. 230 | 25 – 200 | EN 755-1,2 | |||
| Al Zn5,5MgCu | EN AW-7075 | round | T6511 | extruded | min. 550 | 20 – 210 | EN 755-1,2 |
| Al Cu4SiMg | EN AW-2017 | round | T4 | extruded | min. 370 | 80 – 180 | EN 755-1,2 |
Dimensions: standard length 3000 mm, split lengths are possible from a diameter of 40 mm
Aluminium flat bars
| alloy | temper | Rm (Mpa) | thickness (mm) | width (mm) | standard | ||
| EAl 99,5 | EN AW-1350A | H14 | 1/2 hard | min. 140 | 5 – 10 | 20 – 100 | EN 755-2 |
| Al MgSi0,5 | EN AW-6060 | T4 | soft | EN 755-2 | |||
| AlSi1MgMn | EN AW-6082 | T6 | EN 755-2 | ||||
Dimensions: standard length 3000 mm, cutted lengths are possible from a thickness of 5 mm
Aluminium tubes
| alloy | temper | Rm (Mpa) | size (mm) | wall (mm) | standard | ||
|
Al MgSi0,5
|
EN AW-6060
|
T6 | extruded | min. 190 | 8 – 120 | 1 – 12 | EN 755-2 |
| T66 | extruded | min. 215 | 8 – 100 | 1 – 10 | EN 755-2 | ||
|
AlSi1MgMn
|
EN AW-6082
|
T4 | extruded | min. 205 | 5 – 80 | 1 – 5 | EN 755-2 |
| T6 | extruded | min. 290 | 6 – 60 | 1 – 8 | EN 755-2 | ||
Dimensions: standard length 3000 mm